Maintaining proper tire inflation is essential for overall tire performance of your car or any vehicle. The tire is not only a part of your car that touches the road, but it also plays a big role in travel safety. Several accidental damages causes of tire failure. Checking your tire pressure is as simpler as checking the gas in the tank. Still, this task is overlooked as people are busy with their routine task. Well, the way to check your tire pressure is as given below:
Determine Your Car’s Correct Tire Pressure
Your vehicle owner’s manual provides proper tire pressure readings with your vehicle details. Most of the time, the information is printed on the sticker or on the inner door.
Write Down PSI For Each Tire
If you find that your front and rear tires need different pressure levels then you can write down the correct PSI to avoid the confusion when you move your vehicle to tire pressure station.
Remove the valve cap from one side of your tires. Keep the pressure gauge on the valve stem and pressurize it to the downside so that the sound like hiss just disappears and your gauge could provide the reading. By using the standard gauge, the air pressure will be able to release the small bar out via its bottom. The gauge will show the reading on the screen.
You can use the air compressor to refill the low-pressure tire. All the air pressure are different, so you have to be careful. If you are using the compressor at the gas station ensure to park so that all hose can reach to all tires. When you go to the gas station for the air compressor, your tires might get hot. In case, it is necessary to adjust the inflation pressure even when tires are hot then set the pressure to 4 PSI. After filing the tire again check the tire pressure.
It is always the best decision to keep your personal tire gauge instead of that attached at the service station. For this, you can contact the leading Quick Pressure. Our products are designed, patented, manufactured and tested before selling.